在迪庆州酒店晚上怎么叫服务

Welcome to the official website of Henan Gongyi Unicom pipeline factory!
 Expansion joint, expansion joint manufacturer, Gongyi Unicom pipeline factory
[telescopic series]
Telescopic device
SSQ cast iron expansion device
Ductile iron expansion device
CS type thermal pipeline expansion device
SF steel expansion device
RS type flexible sleeve type expansion device
Ssqp both ends flange limit pressure plate extension
Sqx-a casing expansion joint
Sqx-b casing expansion joint
Sqx-c casing expansion joint
[transmission joint series]
Force transfer joint
Vssjafg single flange loose sleeve force transfer connection
Vssjaf double flange loose sleeve force transfer connection
Vssjafc detachable double flange loose sleeve transmission
CF type single flange loose sleeve force transfer joint
C2F double flange loose sleeve force transfer joint
Cc2f detachable double flange loose sleeve transmission
Beijing force transfer joint
Shanghai force transfer joint
Tianjin transfer joint
[waterproof casing series]
Waterproof casing
Stainless steel waterproof casing
Type a rigid waterproof casing
Type B rigid waterproof casing
C-type rigid waterproof casing
02s404 rigid waterproof casing
02s404 flexible waterproof casing
07fs02 rigid closed casing
07fs02 flexible sealing sleeve
Special airtight casing for civil air defense basement
[compensator series]
Compensator
TWB / ztwb oil injected DC medium
Silicone skin of nonmetal compensator
Jr type general purpose metal hose
stainless steel bellows
QB type spherical compensator
Directly buried corrugated compensator
Axial inward pressure bellows expansion joint
Bellows expansion joint with axial compression
Bellows expansion joint of transverse small tie rod
[rubber joint series]
Rubber joint
Jgd single ball flexible rubber joint
Jgd double ball flexible rubber joint
KXT single ball flexible rubber joint
KXT double ball flexible rubber joint
Gjq (x) - SF double sphere flexible rubber
Gjq (x) - DF - II single sphere is flexible
Anti pull off flexible rubber joint
Jgd-b flexible double ball wire connecting rubber
Fan coil connection
[cold rolled flange series]
Cold rolled flange
[expansion joint series]
Double flange limit expansion joint
Vssja-1 single flange limited expansion joint
B2F double flange loose sleeve limited expansion joint
BF single flange loose sleeve limited expansion joint
Ay type gland type loose sleeve expansion joint
Ssjb-3 (by) gland type loose sleeve limit
Ssjb-2 (by) gland type loose sleeve limit
Welded expansion joint
Ssjb (Ay) gland type loose sleeve expansion and contraction
Gfjh double flange steel multiple joint
Rubber joint series

KXT double ball flexible rubber joint

KXT double ball flexible rubber joint: rubber joint is also called rubber soft connection, pipe shock absorber, shock absorber, soft joint, etc. This product is imported from foreign advanced production technology. During the production process, the inner layer is subjected to high pressure, and the nylon cord fabric and the rubber layer get better combination, which has higher working pressure and better quality than ordinary flexible rubber joint. The feature of the vulcanized inner layer is that it combines with the seamless process of the product.

National 24-hour sales hotline: 0371-64031268

KXT double ball flexible rubber joint, the product is a flexible coupling of metal pipe, which is composed of rubber ball with inner rubber layer, nylon cord fabric reinforcement, outer rubber layer composite and loose sleeve metal flange. It can be widely used in water supply and drainage, circulating water, HVAC, fire protection, papermaking, pharmaceutical, petrochemical, ship, water pump, compressor, fan and other pipeline systems. The common type is used to transport air, compressed air, water, sea water, oil, acid, alkali, etc. from - 15 ℃ to 115 ℃. The special type is used to transport the above medium or oil, concentrated acid and alkali, solid materials above - 30 ℃ ~ 250 ℃.

The performance characteristics of KXT double ball flexible rubber joint are as follows
Flexible double ball rubber joint is also called rubber soft connection, rubber elastic joint, pipe shock absorber, shock absorber, soft joint, shock absorber, etc. It is a kind of pipe joint with high elasticity, high air tightness, medium resistance and climate resistance. The flexible rubber joint includes single ball rubber joint, double ball rubber joint and reducing rubber joint. Its performance features are as follows:
1. Flexible double ball rubber joint has the advantages of small volume, light weight, good elasticity and convenient installation and maintenance.
2. When the flexible double ball rubber joint is installed, it can produce lateral, axial and angular displacement, which is not limited by the pipe not in the center and the flange is not parallel.
3. When the rubber joint works, it can reduce the bending vibration of the ball.
4. The internal seamless high-pressure rubber joint developed by our factory can effectively prevent the corrosion of corrosive medium on the inner wall of rubber joint in the pipeline with high temperature resistance, acid alkali resistance and oil resistance, and improve the service life.

Installation method of rubber joint:
1. It is strictly forbidden to exceed the displacement limit when the flexible rubber joint is installed.
2. The installation bolts should be symmetrical, and gradually pressurized and tightened to prevent local leakage.
3. When the rubber joint is installed on the ground, in the air or vertically, the actual working axial displacement pressure of the rubber joint shall be less than the support force of the pipeline, otherwise, anti pulling device shall be installed to prevent pulling off under working pressure.
4. Rubber joint should be far away from heat source and ozone area. Strong radiation light is strictly prohibited. Exposure to the sun and the use of media that do not meet the requirements of this product.
5. During transportation, loading and unloading and installation of rubber joint, it is strictly forbidden to cut the surface sealing surface by sharp instruments.
6. Please use special flange or small diameter flange for butterfly valve when installing products above DN200 mm, so as to avoid flange pulling off, water leakage and water seepage after installation.
Use and installation:
1. Flexible rubber joint pipe construction, it must be in a natural state, do not artificially in the installation of products produce artificial deformation. When the pipeline medium is acid and alkali resistant, oil resistant, high temperature and other special materials, the joint with a gear higher than the pipeline working pressure should be selected.
2. The flange connecting rubber joint shall be valve flange or flange conforming to GB / t9115.1 (RF).
3. The normal applicable medium of flexible rubber joint is ordinary water with temperature of 0-60 ° C. In case of special medium such as oil, acid and alkali, high temperature and other corrosive and hard materials, rubber joint with corresponding special resistance shall be selected, and it is not allowed to be used in series or in general.
4. When the flexible rubber joint is used at the inlet and outlet of the water pump, it should be located at the side of the water spring, and the metal reducing joint should be installed between the water spring and the water spring, and it should be installed at the large diameter source of the variable diameter.
5. When the pipeline displacement is greater than or equal to the maximum compensation of the joint, the number of joints should be increased to parallel the displacement. It is strictly forbidden to make the joint in the limit deflection displacement and deviation state in order to adjust the pipeline out of tolerance, let alone exceed the limit (expansion, displacement, deflection, etc.), see the table below for the specific installation data.
6. For high-rise water supply or suspended water supply, the pipeline shall be fixed on the hanger, bracket or anchor frame, and the joint shall not bear the weight and axial force of the pipe itself, otherwise the joint shall be equipped with anti pulling device (the bearing force must be greater than the axial force of the pipeline).
7. When installing the rubber joint, the screw of the bolt should extend to the outside of the joint, and the bolt of each flange end face should be repeatedly and evenly tightened according to the method of diagonal pressure to prevent pressure deviation. Screw joint should be tightened evenly with standard spanner. Do not use force applying stem to make movable joint slip, slide edge and fracture. Moreover, regular inspection should be carried out to avoid looseness causing disc detachment or water seepage.
8. After the rubber flexible joint is subjected to pressure for the first time (such as installation and pressure test) or before it is put into use again after long-term shutdown, the bolts shall be re pressurized and tightened before putting into operation.
9. When using or storing rubber flexible joint, avoid high temperature, ozone oil and acid-base environment. Sunshade frame shall be built for outdoor or sunny and windward pipes. It is strictly prohibited to have any storm, rain or wind turbidity. It is forbidden to brush paint and wrap thermal insulation material on the surface of joint. Rubber products should be replaced timely due to aging problems.

technical parameter

Nominal diameter
Length L
mm
Flange thickness B
mm
Number of bolts
n
Bolt hole
diameter
mm
Bolt hole center
Circle diameter mm
Axial displacement mm
Lateral displacement
mm
Deflection angle
(a one +a two )
mm
inch
elongation
compress
fifty
two
one hundred and sixty-five
eighteen
four
seventeen point five
one hundred and twenty-five
thirty
fifty
forty-five
35°
eighty
three
one hundred and seventy-five
twenty
eight
seventeen point five
one hundred and sixty
thirty-five
fifty
forty-five
35°
one hundred
four
two hundred and twenty-five
twenty-two
eight
seventeen point five
one hundred and eighty
thirty-five
fifty
forty
35°
one hundred and twenty-five
five
two hundred and thirty
twenty-four
eight
seventeen point five
two hundred and ten
thirty-five
fifty
forty
35°
one hundred and fifty
six
three hundred and twenty-five
twenty-four
eight
twenty-two
two hundred and forty
thirty-five
fifty
forty
35°
two hundred
eight
three hundred and twenty-five
twenty-four
eight
twenty-two
two hundred and ninety-five
thirty-five
fifty
forty
35°
two hundred and fifty
ten
three hundred and twenty-five
twenty-six
twelve
twenty-two
three hundred and fifty
thirty-five
sixty
thirty-five
30°
three hundred
twelve
three hundred and twenty-five
twenty-eight
twelve
twenty-two
four hundred
thirty-five
sixty
thirty-five
30°
three hundred and fifty
fourteen
three hundred and twenty-five
twenty-eight
twenty-three
twenty-three
four hundred and sixty
thirty-five
sixty
forty
25°
four hundred
sixteen
four hundred
thirty
twenty-five
twenty-five
five hundred and fifteen
thirty-five
fifty
forty
25°
four hundred and fifty
eighteen
four hundred
thirty
twenty-five
twenty-five
five hundred and sixty-five
thirty-five
fifty
forty
25°
five hundred
twenty
four hundred
thirty-two
twenty-five
twenty-five
six hundred and twenty
thirty-five
fifty
thirty-five
25°
seven hundred and fifty
thirty
thirty-five
fifty
thirty
25°
one thousand
forty
four hundred and fifty
forty-four
thirty-four
thirty-four
one thousand one hundred and sixty
thirty-five
fifty
thirty
25°
one thousand and two hundred
forty-eight
five hundred
forty-eight
forty-one
forty-one
one thousand three hundred and eighty
three hundred and fifty
fifty
thirty
25°

Company name: Gongyi Unicom pipeline factory address: Xicun Industrial Zone, Gongyi City, Henan Province contact person: Manager Pang Tel: 0371-64031268
Mobile phone: 15617617287 / 15038001853 Fax: 0371-64031728 e_ mail:gyltgd@126.com Yu ICP Bei No. 12019710-5
Professional expansion joint, expansion joint, expansion joint, pipe expansion, limit expansion joint manufacturer Copyright: Gongyi Unicom pipeline factory